SHEET BENDING MACHINE with urethane two-roller technology R2
Bending at pace!
2, 3 or 4 rollers? Understand the specific features of each technology
There is no such thing as the right or wrong architecture for a machine.
Each roller has its speciality.
Enclosed you will find the different types of processes and your material and performance requirements, grouped by machine type:
- Mass production capability with the R2
- Versatility and performance with the R3
- Mastery of heavy thicknesses and an integration into your processes for the R4
The solution to your problem... and more
Our bending machines with two rollers, one of which is made of urethane, can bend your parts in a single pass.
Without prebending or flat edges, our two-roller bending machines form perfectly cylindrical and contiguous ferrules, which makes them easier to weld. The urethane roller also makes it possible to bend precut, perforated, and embossed sheets.
The capacities of our bending machines range from 0.2- to 8-mm thick mild steel, with widths from 5 to 1800 mm.
They are made in collaboration with Lisse SA.
Talk to an expertModel tests
MODEL M SHEET BENDING MACHINE
This sheet bending machine, of simple yet robust construction, is perfectly suited to bending in small or large production runs as well as for experimental work on thicknesses up to 1.5 mm and widths up to 650 mm. It is a 7-bar pneumatic machine.
MODEL B SHEET BENDING MACHINE
These plate bending machines come in a wide range and are intended in particular for the most common thicknesses, from 1.5 mm to 5 mm, in widths from 500 to 1800 mm. This machine is equipped with a hydraulic unit.
MODEL C SHEET BENDING MACHINE
With its very robust construction, this two-roller bending machine is designed especially for < class="d2b">the mass-production bending of metal plates 5- to < class="d2b">6-mm thick, with widths ranging from < class="d2b">800 to 2000 mm. This machine is equipped with a hydraulic unit.
Thin sheets
Very high rate
Perfect prebending
Integrated process
