PLATE BENDING MACHINES: ELECTRIC VERSION RXe

Our plate bending machines in a 100% ELECTRIC version!

The solution to your problem... and more

> 3 rouleaux

Capacity 0.5-8 mm (steel S235)

Usable length: 1-3 m

The R3e and R4e are the 100% electric versions of our machines.

Each roller is driven by independent synchronous motors.
High-performance electrical cylinders (0.01 positioning precision) make the rollers travel up and down.

Its ability to roll thin materials without laminating the sheet and its prebending performance with a limited residual flat edge are thanks to its special symmetric architecture.
Thanks to its linear guide system (specific angle) and its bearing system with bronze rings, we guarantee high-quality rolling with regard to sheet edge straightness and cylindrical roundness.

We especially recommend the electric version of our plate bending machines for:

  • Its high precision
  • Up to 80% energy savings compared to the hydraulic version.
  • Interchangeable top roller
  • Quiet operation and ease of use
  • Minimum maintenance.

Available in Easyroll version only

 

Talk to an expert
RXe

What are the advantages of PLATE BENDING MACHINES: ELECTRIC VERSION

01

High precision

Each roller is driven by independent synchronous motors.

High-performance electrical cylinders (0.01 positioning precision) make the rollers travel up and down.

The rollers are synchronised by NC.
Variable speed of rotation according to the control strategy and handling of joysticks.

Benefits: maximum torque, optimised efficiency, synchronised speed, reliability, maximum efficiency and no wear.

Note: our competitors have only one or two powered rollers as standard, and not with synchronous electric motors

02

Interchangeable top roller

For the purpose of creating small-diameter parts, the machine can be supplied with an interchangeable roller of the desired diameter.

03

Energy savings

The machine only consumes energy when the rollers are moving or rotating, unlike the operation of hydraulic units.

According to the operating cycles and its use, up to 80% energy savings can be achieved.

04

Silent machine

With 100% electric actuators, the machine is very convenient and quiet to use.

05

Minimum maintenance

Because the machine is 100% electric, you have no problems with the presence of oil or oil leakage.
Maintenance is limited to the strict minimum.

Benefit

Control with thin materials

Benefit

High-performance prebending

Benefit

Bending of perforated or fragile sheets

Benefit

Rolling of thin cones

With Easyroll I didn't take 1 step forward, I took 1000!
M. Ballon - MB Technique R3h170-20@2022)

Follow the guide

Picot engineers have developed an innovative software, a real GPS dedicated for roll bending

Increase your versatility and get the roll bending results you want faster!

Human/Machine
Interface

With its ergonomic, user-friendly HMI, easyroll® integrates driving and technological innovations into intelligent, predictive, learning and adaptable digital assistance software.

Discover our range of control peripherals designed to meet your needs. Hover over the image to find out more about the selected console...

Contact us >
1/4

  • Easyroll rolling assistant
  • Smart material database
  • Calculation of springback
  • Cone rolling assistant
  • Assisted design & .DXF
  • Automatic correction with AIR mode (Artificial Intelligence for Rollbending machines)

Our consoles are designed for plug & play operation: no action required on your machine.

2/4

  • Same comfort + NC learning

  • Excellent repeatability of bending by process duplication (high-volume production).

  • Memory capacity: 500 5-steps programs

  • USB key (to back up programs and settings)

Our consoles are designed for plug & play operation: no action required on your machine.

3/4

  • Optimum control of all roller movements (roller movement actuated by progressive flow electrohydraulic valves)

  • Controls located on a mobile console (so the operator can move around the machine).

4/4

  • Movements controlled directly by manually-operated progressive flow hydraulic valves
  • Controls located on the right-hand side of the frame on the end of the machine (excellent visual monitoring)

PLATE BENDING MACHINES: ELECTRIC VERSION is an asset for your market

Picot sheet bending machines are used in all sectors of industry, construction and even design. Below, you'll find a description of your trade, examples of our customers and the key information you need to answer any questions you may have.